|
|
Post by wildthing on Mar 24, 2010 20:50:39 GMT -5
need a cam for blown bbc. anyone got one or specs?
|
|
|
|
Post by Ron Evans on Mar 25, 2010 13:34:02 GMT -5
ours went with the motor, but you can't go wrong talking with Gary Henderson at Comp Cams. he's da man!!
|
|
|
|
Post by my23taltered on Mar 25, 2010 19:21:55 GMT -5
i run a doug herbert cam its preaty small 698 700 lift 112 lobe center at .50 269 intake 275 exhaust the number is b6g(b) have run 4.49 with my 440 ci bbc and its easy or springs
|
|
backmotor
Quarter Finals
Future Funny Car Star
Posts: 24
|
Post by backmotor on Mar 26, 2010 13:52:20 GMT -5
I had REALLY bad luck with my Herbert Cam, it broke in half with very low spring pressures, and w/ very little run time !! Bent every valve behind the break, they gave me a Howards Cam to replace it, and said sorry  The Howards Cam wore some lobes off, in about 6 runs, and shed metal shavings thru-out my engine, then they told me buy your cam somewhere else !! Been using Crane & Crower ever since, never had another problem either. ;D |
|
|
|
Post by my23taltered on Mar 26, 2010 19:13:49 GMT -5
been running doug herbert for at least 10 years no problem
|
|
|
|
Post by dacoupe on Mar 26, 2010 19:37:27 GMT -5
We've also been running a Herbert cam for several years of course its just a small block not one of them big boat anchors ;D ;D
|
|
The Howards Cam wore some lobes off, in about 6 runs, and shed metal shavings thru-out my engine, then they told me buy your cam somewhere else !! Been using Crane & Crower ever since, never had another problem either. ;D